Moultrie LX-50IR Specifications download pdf (Page 10)

Setting (IR) Infrared Flash

Press the (OK) button. Use the (Up/Down) buttons

to choose between

AUTO-(IR flash will fire depending on light intensity)

OFF-(IR flash is permanently off).

Press the (OK) button. Press the (Right) button.

Setting Camera Name

Press the (OK) button. Use the (Up/Down) buttons

to select an identity for your camera. For example

you can use a name or a location but, the identity

you wish to use is up to you. Press the (OK) button.

Press the (Right) button.

Upgrade Firmware

The firmware version is displayed. Press (Up/Down)

to choose setting.

(YES) - To upgrade firmware.

(NO) - Keep current firmware.

Make sure that a SD card with the new firmware is

inserted into the camera. Press the (OK) button to make selection. Make sure the process is

completed before pressing other buttons or powering the camera Off. Press (Right) button to

go back to (Setup Selection) screen.

Setting Time Lapse Features

When you choose (Time Lapse) the LCD Display will automatically start showing the

different features within (Time Lapse). Using the navigation process, set the features to your

desire.

Interval Time Setting

Press the (OK) button. Use the (Up/Down) buttons

to choose between 10, 30 seconds / 1, 5, 10, 15,

or 30 minutes / 1, 3, 6, or 24 hours. When your

selections has been made, press the (Right) button.

Setting Multi-Program

Press the (OK) button. Use the (Up/Down) buttons

to choose between 4 available settings:

1 PROGRAM, 2 PROGRAM, 3 PROGRAM or

4 PROGRAM. This indicates the number of cycles

the camera will operate within a 24 hours period.

Press the (OK) button. Press the (Right) button.

Setting Program Wakeup

Press the (OK) button. Use the (Up/Down) buttons

to choose between 24 different settings: any hour

from MIDNIGHT to 11 PM. This will determine what

time the camera will wake up during the program

and begin its time lapse program. Press the (OK)

button.

Setting Program Sleep

When wakeup time is set, the camera will

automatically move to the (Sleep) option. Set the

sleep time after the wakeup time you already set.

This will set the wake up and sleep during the

time lapse photography. Press the (OK) button.

Press the (Right) button.

Aiming Camera

After the camera has been mounted, open the

cover and slide the (Mode) Switch to (IR Aim).

Close Cover. Stand in front of the camera. The

(Status) LED will flash red when it detects

movement. Use this process to guide your

camera to cover the desired target area.

Using a Tripod

Set the Tripod facing up or down the trail

approximately 3 ft. high. Screw the camera

onto the Tripod head in a clockwise direction.

Lock the tripod into place.

Hint: Place something heavy around the legs

of the tripod to help hold the tripod in place.

Camouflage the tripod with local brush.

Note: Make sure that the brush does not

interfere with the camera.

Using a Tree Mount

The camera can also be mounted directly to a

tree using a mounting bracket that attaches

directly to a tree or pole. Strap the tree mount

to the tree and secure, then attach the camera

to the tree mount using the tree mount socket

located on the back of the camera.

Using Power Panel

Place near the tree where the camera is

mounted. Place for best exposure to sun. To

attach to a tripod secure the power panel to

the tripod angled upward for best exposure.

Plug the power panel to the 12V Power Panel

Plug. This will extend the life of your camera

in the field.

Note: Leave batteries in the camera installed

during use.

Moultrie Accessories

11 8

1 2 ... 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Moultrie LX-50IR Specifications Page 10

Comments to this Manuals

Related products and manuals for Bridge cameras Moultrie LX-50IR